Theoretical Research of Spreading of the Seismic Waves Arising from Underground Explosions and Earthquakes
Information and Computing Network Designed to Support Scientific Centers and Institutions Activities when Developing Joint Scientific-technical Projects and Conversion Programs (Second Stage).
Investigations of Z-pinch X-ray Source for Medicine and Microelectronics.
Development of electrokinetic and chemical methods for rehabilitation of soil and ground water contaminated by radionuclides and heavy metals.
Feasibility study of technologies for accelerator based conversion of military plutonium and long-lived radioactive waste.
Reactor Pumped Laser for ICF Feasibility
Study of the Interaction Between Tritium and Candidate Materials for Use in Fusion Reactors
Physics of controlling pulse technology for diamond synthesis and compaction.
Development of a High-capacity Content-Addressed Neuron Network Memory
Nuclear waste management and disposal at MAYAK site.
Models for transport and transformation of atmospheric trace contaminants.
Experimental and theoretical simulations of a plasma-type neutron source GDT based.
Development and testing of models to calculate migration of radioactivity in groundwater.
Evaluation of the potential health risks resulting from worker and public exposures to toxic and radioactive substances in the Chelyabinsk Region.
Simulation of complex dynamic processes in nuclear power plants. Development of basic program codes. Adaptation of the codes to multi-processor computers.
New generation of integrated program tools for portable parallel program development on NPP.
Development, Calculation and Experimental Validation of the Lead-Cooled Fast Reactor Concept (including the Comparison of Critical and Subcritical Reactor with External Proton Source)
Atomic and radiation processes in plasmas, gases and solids
Investigation of impurity evolution in plasma streams generated by means of pulse plasma accelerators to provide Tokamak-Reactor fueling.
Proposal for hot roll-forming of axially symmetric parts out of hard to deform materials.
Generation of ultrashort high power pulses in solid state lasers and implementation of these pulses for the investigation of the interaction of super-intense light field with matter.
High power solid state laser with pulse compression.
Development of methodical and calculation technology verification of nuclear data bases used in the calculation of neutron-physical characteristics and in analysis of nuclear safety of reactor facilities and nuclear conversion technological processes.
Experimental investigation of transition of supersonic boundary layers relevant to high speed air transportation.
The use of whispering gallery effect for steering of synchrotron radiation beam and testing of supersmooth concave surfaces.
Investigation into Pecularities of the Turbulent Mixing and Development of the Program Complexes for its Description.
Experimental and Calculational Studies of Nonuniform Shieldings of Fusion Reactors and Development on this Basis of a Set of Benchmark Type Experiments for Codes Verification.
Development of Surface Modification Techniques for Superhard Materials.
Tests and Studies on Gas Migration in Rock and Soil for Geological Disposal of Radioactive Wastes.
Investigation and Evaluation of the Geological Characteristics of Deep Drill Hole in Russia for the Study of Geological Disposal of Radioactive Waste.
Investigation of Physico-Chemical Processes of Cleaning Evolved Industrial Gases From Sulphur and Nitrogen Oxides and Creating a Technical Base Method of Radiation Cleaning Gas Flowers by Pulse- Repetitive Electron Beam.
Preparation of Handwriting of Book "Pulsed Reactors in RFNC-ITP. History, Working, Exploration, Investigation".
Development of the Instruments for Optical 3D-Intrascopy-Medical Optical Tomography.
Fundamental Research on Radiation Damage Mechanisms for Application to Fast Breeder Reactors or Future Nuclear Fusion Reactors.
Experimental and Computation-Theoretical Investigations of an Accident at an Oil-Chemical Plant Safety
Superlight Source of Electromagnetic Radiation. Possibility of creation. Application for Creation of Electric Field with Extreme Parameter.
The Soft X-ray Source Based ECR-discharge Sustained by Powerful Gyrotron Radiation in Heavy Gases.
Development of the Conceptual Project of Nuclear Thermal Power Propulsion System (NTPP) for Space Exploration. Conducting of Fuel Testing in the IVV-2 Reactor. Development of Principles to Ensure Nuclear and Radiation Safety of NTPP...
Research and Development of Electrochemical Instruments and Procedures for Environmental Monitoring.
Development of On-line System Based on a Long-lived Sensor for Measuring Concentrations of Toxic Elements in River Water
Development of On-Line System Based on a Long-Lived Sensor for Measuring Concentrations of Toxic Elements in River Water
Development of Methods and Pilot of Equipment for Use in Systems of Detection of the Presence and Identification of Radioactive and Fissionable Materials.
Development of Model of Closed Tritium Loop with Purification Technology, Radiation Resistant Diagnostics and Radiation Shielding, Theoretical and Experimental Simulation of Plasma Effects on Reactor Systems with T-Be Safety Analyses in Support of ITER.
Development and Manufacture of the Multifunctional Shock Tube and Investigation into the Rayleigh-Taylor Turbulent Mixing of Different Density Gases
Assessment of Feasibility of Creating a System for Earth Protection Against Impacts of Near-Earth Space Objects
Shut down Reactor Transformation into Subcritical Neutron Source. Control and Safety System Substantiation and Development.
Atom Probe Field Ion and Scanning Tunneling Microscopy of Defects and Structure Phase Transformations in Metals and Alloys while Impulse and Stationary Irradiation by High Energy Particles.
Laser-Based Complex for Early Diagnostics of Malignancies.
Development of New Technologies for Generation of Nanoceramics Al2 O3, TiO2, ZrO2 for Mandrels and High Temperature Fuel Cell.
Development and Computational-Experimental Validation of the Concept of Self-Quenching Multi-channel Pulse Graphite Reactor (MIGR) for the Studies on Nuclear Reactor Safety.
Universal Laser Diagnostic Device to Control Heterophase Processes "in situ".
Development and Computational-Experimental Validation of Activation Concept for Neutron Express-Indicator of Protein Content of Grain and Grain Products
Neutron Source Based on Plasma Gas Dynamic trap: the Key Elements.
#0493High- Speed Impact
The Physics of High-speed Impact in Methods of Solar System's Exploration.
The Assessment of Priorities for Middle Urals' Environmental Pollution Protection.
#0525Stable Plasma Column
Production of a High Temperature Dense Plasma Column Stable in Time and Space.
Generation of Microwave Radiation by FEL with Sheet Electron Beam and Two-dimensional Distributed Feedback.
Plasma-surface Interaction Study in Heat Load Range Typical for Tokamak Disruption and Plasma Technology
Engineering Design Infrastructure for High-Technology Equipment.
Development of the Physical Substantiations of Electronuclear Power Installation.
Electron, Optical and Structural Properties of Nanocrystalline Silicon Obtained by Hydrogen Isotope Irradiation of Monocrystals.
Study of Structure of Materials Based on U-Pu-Zr alloy, their Thermodynamic Properties and Interaction with Materials of Fuel Element Shell under Quasi-Isothermal Conditions and Conditions of Non-stationary Exposure
Substantiation of Feasibility of Controlling the Comprehensive Test Ban Treaty through On-site Inspection.
The Development of Practical Decisions of the Decrease of the Sound Vibratin and Noise in Products of Common-technical and Medical Purposes
The Development of Practical Decisions of Problems of the Maintenance of the Designs Units and Blocks Resistance at Actions of Extreme Vibrating and Shock Loads
The Research of Effectiveness of Composed Remote Neutron Therapy and Local Hypothermy for Curing Radio-resistant Tumors.
Development of Construction Concepts for Computerized Control, Monitoring and Diagnostic System for Nuclear Power Plants with Improved Safety.
Investigation of Opportunity to Increase the Explosive Works' Safety in Collieries, Dangerous on Gas and Dust
#0612-2Explosive Works Safety
Investigation of Opportunities for Increasing Explosives Work Safety in Collieries with Dangerous Levels of Gas and Dust
Research of the Shock-wave Loading Influence on Proceeding of Mechanochemical Reactions at Synthesis of New Types of Composite Materials
Technical Issues of Ensuring International Stability (Securyty) in the Nuclear-Free World
Simulation of Explosive Processes in Molecular Systems under the Action of External Factors Using Quantum Chemical and Molecular Dynamics Methods
Simulation of Explosive Processes in Molecular Systems under the Action of External Factors Using Quantum Chemical and Molecular Dynamics Methods
Specialized Mass Spectrometers for Analysis Tritium Gas Mixed in "In-line" Mode
CRYSTAL: Systematic Ab Initio Calculations of Cold (T= 0K) Compression Curves for Chemical Elements and Some Compounds
Writing a Copy of the Book on Processing of the International Conference SPE-94 "Protecting the Earth from Collision with Asteroids and Comets
Analysis of Perspective Technical Solutions of Nuclear Power Facilities on the Basis of Patent Information Study.
Study of the Seismic Wave-Field Structure in a Regional Zone for Discrimination of Underground Explosions and Earthquakes
Experimental Mock-Up of Accelerators-Based Facility for Transmutation of Radioactive Waste and Conversion of Military Plutonium.
Preparation of Manuscript of Book "Analytical and Nucmerical Strudying of Turbulent Mixing at Accelerated Motion of Substance"
Investigations of Underground Nuclear Explosions Impact on Natural Collectors, and Possibilities of Practical Utilization of Revealed Mechanisms in Mining Industry
Feasibility Study of Technology for Computer-Aided Design of New Drugs
Cherenkov Quartz Calorimeter
Research of Weak UV-Radiation Registration Methods in Presence of Visible Range Radiation with Use Photoelectron Devices for Surface Condition Analysis
Development the Family of Devices Intended to Measure Moisture of Bulk Materials
Development of Physical and Chemical Principles for Radiation Techniques of Material Modification by Electrons, Polyenergetic Ions and High Temperature Plasma Fluxes (Phase of Feasibility and Market Study)
Development of Physical and Chemical Principles for Radiation Techniques of Material Modification by Electrons, Polyenergetic Ions and High Temperature Plasma Fluxes
Research of Opportunity of Creation of Hybrid Electronoptical Chronological Device with Direct Photoelectron Registration by One-dimensional Position-Sensitive Detector
RIKEN/Budker INP Low Energy Positron Source
#0767-3Low Energy Positron Source
RIKEN/Budker INP Low Energy Positron Source: Target-moderator System
Development of Methods for Creation and Registration of Unique Recognizable Optical Images for Nuclear Material Control
Mesoscopic Phenomenon in Disordered Si-based Structures at Neutrons and Gamma-rays Irradiation
Study of Formation and Magnetic Compression of Plasma Liners Produced by Low Density Heterogeneous Substances
Evolution of the Chemical Composition of Galaxies and Clusters of Galaxies
Development and Design of New Polyfunctional Compounds and Materials for Radiation Hygiene and Medical Prophylactics. A stage #1. Edited and coordinated workplan
Development and Design of New Polyfunctional Compounds and Materials for Radiation Hygiene and Medical Prophylactics. Stage #2.
Experimental and Theoretical Study of Chemical and Physical Properties of Rocks as natural Barrier in Radioactive Waste Disposal
Study of State and Properties of the Continental Type of the Earth Crust in Russia with the Aim of the Defining the Optimal Conditions for Radioactive Waste Disposal (Based on Superdeep Wells and Deep Geophysical Surveys)
Investigation of Convective Flows of Heterogeneous Mixtures in Superdeep Quarries
Investigation and development of Pilot Technology for Manufacture of Multilayer Hollow Structures out of Submicrocrystalline Titanium Alloys by Superplastic Forming and Diffusion Bonding
Development of X-ray Fluorescent Spectrometer for Continuous Measurement of Mass Fraction of Chemical Elements in Production Lines of Ore Mining & Concentrating and Chemical Enterprises
Research into Photoexcitation of Nuclei by Characteristic X-Radiation
Development of scientific Foundations or Creating Composites by Radiation Methods
Investigation of Electromagnetic Signals Accompanying Underground Chemical Explosions
Study of the Conditions for the Reactivity Burst Occurrence at the Reflood Phase of a Loss-of-Coolant-Accident in VVER-type Reactors
Creation of the Laser Lighting Protection System
Investigation into the Behavior of Color of Rough Minerals Under Gamma-Radiation and Research for Methods of Stabilizing and Retaining Color Changes
Hydrodynamics of Liquid Flows During Fast Overlapping of Pipelines
Implementation of the Physical Researches in Behalf of Development of Point Source of Incoherent X-Ray Radiation on Z-Pinch
Chemically Modified Nuclear Nano- and Ultrafilters: Structure and Selective Properties
Elaboration of Ways for Minimizing the Medical Consequences of Radiation Exposure
Development of an Apparatus for Nuclear Material Control Using a Pulsed Neutron Generator
Creation of a Database on Ecological and Radiation Safety under the Interaction of Hydrogen and its Isotopes with Constructional Materials of Energy Devices
Atomic and Radiative Processes in Plasma, Gases and Solids: Non - Equilibrium Nonlinear Spectroscopy in Dense Gases and Plasma
Theoretical and Experimental Study of Physical Effects Concerned with Interaction between Polarization and Propagation of Light
Development of Methods and Instrumentation for the X-Ray Testing of Supersmooth Surfaces and Interfaces
Development of Scientific Fundamentals for Development of Low-Activation Radiation - and Corrosion-Resistant Vanadium-Based Alloys to be Used as Structural Materials for the first Wall and Tritium Blanket Thermonuclear Fusion Installations and Reactors
Development and Manufacture of an Operating Mock-up of a Complex for Automatized Brain and Heart Function Diagnosis
Study of Space Object Interaction with the Earth's Atmosphere
Atmospheric Transport of Radioactivity in the Vicinity of the Karachai Lake
Development of Neuro-Stereo-Display for 3D Visualization
Feasibility Study for Improving the Efficiency of Artificial Diamond Production by a Dynamic Method
Investigation of Wave Processes Dynamics in Point-Antipode of Massive Space Body Impact to the Earth
Synthesis of New Classes of Composite Materials in Conditions of Combined Environments
Development of the Model of Substance for Description of Processes with Motion of Brittle Low-Strength Media
Researches on Development of a Method of Surface Micromechanical Tests of Metal Oxide Thin-Film Heat-Resistant Coatings on Metal-Ceramic Substrates for High-Temperature Fuel Cells
Anomalous Behavior of Magnetic Permeability and of Electromagnetic Wave Propagation Velocity and Reflecance in the Region of Magnetic Phase Transitions
Completion of a Closed Tritium Circuit Device, Investigation of Processes, Manufacturing, and Tests of Models of ITER Tritium Loop Components; Experimental Simulation and Theoretical Analysis of Plasma Effects of ITER In-Vessel Structure Components; Radia
Superplastic Treatment of Intermetallic Aluminide-Based Alloys (TiAl, Ti3Al)
Experimental Investigation of Faster-than-Light Electromagnetic Radiation Source Characteristics
Investigation on Failure Mechanisms and Phase Transformations in Solids under Dynamic Loadings
Radiative Properties of Picosecond-Lazer-Produced Plasmas
Molecular Modeling of Anti-Tumour Fluouracil Action
Risk Analysis of Rail Shipments of Nuclear Materials
Investigation of Dynamics of Powerful Capillary Discharge Plasma in the Medium of Gas and Metal Vapors
Development of Vacuum-Plasma Technologies for Fabrication of Thin-film materials for High-Temperature Solid Oxide Fuel Cells of Electrochemical Power Generators
Applications of High-Power Subpicosecond Lasers For Basic Scientific Investigations, Technology, and Biomedicine
Optimal Multidimensional Grids and Their Applications Creation of High-Precise Adaptive Methods of Solution of Mechanics of Continua Problems
New Combinations of Materials with Use of Metal Matrix Composites
Development, Manufacture and Clinical Tests of Operating Mock-up of Apparatus & Program Complex for Treatment of Prostatitis, Adenoma and Carcinoma of Prostate
Safe Transference of Spent Fuel Assemblies from Near-Reactor Storage Pools to Long-term "Dry" Storage
"Track". Development of the Complex on the Basis of the USTU-UPI 120-cm Cyclotron for Production of Nuclear Track Membranes and Investigation of their Separation Characteristics
Development, Research and Advanced Nanocrystalline Materials
Modeling of Shock-Induced Mixing in Layered Media.
Development of Automated Nuclear Materials Control and Accounting (NMC&A) Methods for Fissile Material Storage Fasilities (FMSF)
Development of New Technologies of Manufacturing Glass-Titanium and Glass-Aluminium Electrical Connectors with Improved Technical Characteristics
Data Bank on Phisical-Mechanical Properties
Research of Cumulative Jets Interaction with Spent Nuclear Fuel
Technogenic Radiation Risk Assessment for Population Residing Nearby Atomic Facilities
Development of Technology for Fire and Explosion Safe Storage of Wastes from Industrial Processing of Metallic Uranium
Development of the Automatized Spectrometric Device for Continuous Control of the Explosive Core Mass of the Detonating Cord
Carbon Nanomaterials and Composites: Synthesis and Electron Field Emission
Experimental Investigation into Stabilised Properties of Transitional Layers on the Evolution of Turbulent Mixing
Investigation of the Effect of Exposure to Tritium and Reactor Irradiation on the Properties of the First Wall and Divertor Materials for Magnetic Fusion Experiment
Mathematical Modeling of Hydrodynamics Guiding the Evolution of Catastrophic Tsunami Waves
New Methods of Synthesis of Exchange-coupled High-Coercive Hard Magnetic Materials on the Base of Rare-Earth Ferromagnetics Using Mechanically-Induced Reactions in Solids
Development of Scientific Foundations and Establishment of Technological Basis of Pulse Electro-Physical Techniques for Purification of Industrial Stack Gases from Toxic Volatile Organic Compounds
Theoretical-Calculation and Experimental Support of Safe Transportation and Storage of Excess Weapons-Grade Plutonium Transferred to the Civil Sphere of Utilization
Mathematical Modeling of Space Experiments Using of High-Velocity Impacts of Artificial Objects with Surface of Small Bodies of the Solar System
Neuro-Network Forecasting of Turbulent Mixing Development Based on Wavelet-Analysis
Accelerator Based Neutron Source for the Neutron-Capture and Fast Neutron Therapy
Development of the Economical Adaptive Simulation Methods of 3D Vortex Flows for Multicomponent Media
Multi-Charged Ion Source Based on ECR Discharge in Heavy Gases Sustained by Powerful Gyrotron Radiation
Research of Fastening Joints and Development of Recommendations on Reliability Upgrading
Three-dimensional Magneto Hydro Dynamics Code in Arbitrary Moving Coordinate System
#1585Satellite Gas Sensor
Conception Development of New Generation Sensor for Greenhouse Gas Monitoring from Space Using High Resolution Infrared Spectrometry
Issue of the Monography "Pulsed Reactors in the RFNC-ITP" (final stage of ISTC project 276-96)
Development and Testing of Encoding/Decoding Prototype Device for the Databases of Material Protection, Control and Accounting Systems
Experimental Mock-up of Molten Salt Loop of Accelerator-Based Facility for Transmutation of Radioactive Waste and Conversion of Military Plutonium. Stage 2: Experimental Study of Molten Salt Technology for Safe, Low-Waste and Proliferation Resistant Treat
Design and Development of Large Area Precision Tracking Detectors and Their Support Structures (Phase I)
Technology of Nuclear Materials Identification with the Help of the Equipment Measurement-control Complex and Development of Commercial Proposal on its Application
Development, Manufacture and Demonstration Tests of 2,5 kW Power Solid Oxide Cells Stack
Radiation Safety System in Points of Customs Operations
Geoinformation Support of Emergency Service at Especially Hazardous Industrial Facilities
Development and Manufacture of the Automatic System of Radiation Monitoring for the High-Power Free Electron Laser
Research of Properties of Capillary Cement Materials (CCM) and of Possibility of their Application for Want of Construction and Repair of Objects with a Radiation Load
Powder Spraying on Bases by Using the Shock-Wave Loading Processes under Conditions of Low Temperatures
Development and Investigation of the Small-Scale Desk-Top Electronic Paramagnetic Resonance Spectrometer - Ionizing Emissions Dosimeter
Technology of Nuclear Submarine Dismantlement Using Abrasive Water-Jet Cutting Method
Experimental Study of Possibility for Carbon Nitride Synthesis under Shock – Wave Loading
Developing the Computerised Procedure Intended to Dynamically Assess the Efficiency of the Nuclear Material Physical Protection, Control and Accounting (MPC&A) System and to Optimize Expenditures Associated with Hazardous Facility Protection and Security
Study of Molecular Mixing Effects and Heterogeneous Structure of Rayleigh -Taylor Turbulence
Investigation of Pulse Cathodoluminescence of Substances, Development of Method, and Building of Equipment Complex for Condensed Media Analysis
Ways and Technology of Connection of Ceramics and Metals with Ceramics for Creation of Thermo-Stable, Tight and Strong Products
Validation of Gas-Explosion Destruction of Explosion-Hazardous Chemical Munitions
Evaluation of Rehabilitation Possibility for Sapropel Water Reservoirs Located on the Easten-Ural Radioactive Trace (EURT)
Study of Features of Weak Disturbances Propagation in Solid Medium During Structure Changes and Development of Pilot Technologies and Equipment for Nondestructive Check of Structure
Analytical Solutions to Test Computer Codes Simulating Gas Dynamics Problems in Different Approximations
Online Database on Spectral Properties of Atoms and Ions on the World Wide Web
Investigation and Development of Devices to Reduce Mechanical Vibration and Noise in Electric Machines
Conception of Creation of Research Spacecraft with Kinetic Penetrators for Aimed Attack on Asteroids to Study Their Properties
Dynamics of Compressible Media: Modern Electronic Course
Study of Possibilities for Identifying Concealed Explosions in Seismically Active Mountain Country with Commercial Explosions: Selection of Experiment Configuration and Issue of Documentation for Project
Developing of Three-Dimensional Code for Flows with Large Deformations Modeling Using Irregular Grids
Development and Investigation of the Single-Point System for Lightning Location in the Range of Super-Long Waves
OSI CTBTO Training and Simulating Software
Obtaining of Theoretical and Experimental Data on Transport Coefficients for the Wires Using in Z-Pinches Implosion
Telecommunication Informational and Analytical System for Technical Support of Export Control for MINATOM of Russia
Working out a Program of Remediation and Development of the City of Karabash by Implementing Technologies for Recovery of Its Technogenic Resources
Developing Hardware, Software and Methodical Support for Diagnostics of High-Power Transformer Windings without their Disassembly
The Creation of Scientific Basis for Development of Technology for Manufacturing Sheets and Strips of Fe- and Cu-based Alloys with Nanocrystalline Structure with Enhanced Strength, Electric Conductivity and Damping Properties
Comparative Evaluation of Input Weight of Radioactive Contamination Sources of Different Genesis In The Ob'-Irtysh River System
Development of Models and Software to Study and Register Interactions between High-Energy Particles and Matter
Metal-Matrix Composites on the Basis of Nano-Diamond and Nano-Metal Powders
Development of Elements of the Technology Producing Hollow Blades from Submicrocrystalline Titanium Alloys by Combining Molding and Diffusion Welding under Low-Temperature Superplasticity, Including Non-Destructive Quality Control over Parts Produced
Electromagnetic Effects at Blasting Destruction of Rocks
Non-Stationary Iterative Decomposition Methods for MIMD-type Parallel Computing Systems: Theory and Applications
Experimental Development of Geophysical Technologies of Continuation Phase of CTBT OSI with the Aim of Recording Physical Fields Anomalies Conditioned by Conduct of Underground Nuclear Explosions in Different Geological Conditions
Developing a small-sized device intended to effectively measure moisture content in transformer oils
Development of Data Acquisition and Processing System of Integrated Physical Protection System MARS-2000
Development of Scientific Fundamentals for Creation of Irradiation Resistant Structural Zr Alloys for Nuclear Reactor Cores
Development of the Technology for Concentrating and Cure of Spent Radioactive LCL
Processing Compact Weapon Plutonium into MOX-fuel by Anhydrous (Thermochemical and Thermoelectrochemical) Methods for Thermal and Fast Reactors
Noncontact System for Dynamic Monitoring of Objects
The Experimental Study of Dynamics of Scaled Gas-Filled Bubble Collapse in Liquid
The Study and Development of Electrochemical Methods, Sensors and Instruments for Evaluation of the Microelemental and Immune Status of Organisms
Advanced Information and Communication Systems
3D tomographic models of the earth for improvement of seismic sources localization
Development of the Program Package for Numerical Simulation of Human Organism’s Systems of Circulation, Respiration, Digestion and Water Balance with Consideration of Their Interaction and Influence of External Factors
Experimental Investigation and Mathematical Simulation of “Cold start” of Metal Wire Explosion by High-Power Current Pulse (Dynamics, Transport Properties, and Equation of State of Metastable Phases)
Development of a cardiac analyzer for differential diagnosis of an Acute Myocardial Infarction and its complications with the complete planimetric description of ECG signal evolution in natural language
Creation of 3D Geomigration Model for Unloading Section of Contaminated Groundwaters from the Karachay Lake to the Open Hydrographic Network
Investigation of Initial Stages of Explosive Decomposition of Energetic Materials by Methods of Radiation Solid State Physics
Creation of Computing System of Regional Situational Center
Generation and Amplification of Microwave Radiation Pulses in High-Power FEM with Two-Dimensional Distributed Feedback and Non-Linear Effects at High Radiation Intensity
Radiation-Dynamic Effects at Irradiation with Neutrons, Ions, Fission Fragments, Non-traditional Methods of Material Properties Modification and the Problem of Nuclear Reactors Safety
Proton Accelerator Based Intense Source of Radioactive Ions for Nuclear Physics Experiments
Soft X-ray Reflective Optics Based on Depleted Uranium Compounds and Transition Metals for the 3-6nm Wavelength Interval
Direct Measurements of the N-N Scattering Cross Section at the YAGUAR Pulsed Reactor
Theoretical and Computer Simulation Study of High Energy Ion Acceleration with a Shot Intense Laser Pulses
Development of Methods and Equipment for Surface and Thin Film Study in EUV Spectral Region
Development and Study of New Statistical and Technological Models for Radioactive Waste Treatment
Evaluation of the Risk of Remote Consequences Caused by Dangerous Factors of Nuclear and Chemical Technologies Affecting the Population
Development of Cost-Effective Processing of Sheets and Foils out of Intermetallic Alloys Based on Gamma-NiAl and O-TiAl2Nb with Improved Superplastic Properties
New Methods of Utilization of Polyethileneterephtolate Waste Unfit for Natural Decomposition
Improvement of Formability of Textured Sheets from Magnesium Alloys
Current Quenching Phenomenon in Pseudospark and Capillary Discharges and Mechanism for Generation of an Extreme Ultraviolet Radiation from the Discharge Plasmas
Development and Test of the Beta-, Gamma-Activity Indicator of the Radioactive Subterranean Waters
Development of a Hardware and Software Suite for Preventive Psychophysiological Examination and Rehabilitation of Workers Engaged in Potentially Hazardous Production
Accelerator Based Neutron Source for Boron Neutron Capture Therapy
New Catalysts and Sorbents with Application of Nanocrystalline Metals, Oxides and Diamonds
Development and Testing of the Reactivity Evaluation System to Provide Nuclear Safety of Subcritical Systems and Non-destructive Control of Nuclear Materials Inside Technological Equipment and Containers at Nuclear Industry Enterprises
Pulsed Gas-Discharge Lasers with Pumping from Inductive Energy Store with Semiconductor Opening Switch
Synthesis, Studies, and Application of Aza- and Diazabicyclononanes as Complexing Agents, Preparations for Radiation Hygiene, and Medicines
Development of Scientific Grounds and Technologies for Cyclotrimethylenetrinitramine (RDX) and Cyclotetramethylenetetranitramine (HMX) Utilization
Structure-Matrix Models for Improving Section Rolling and Wire Rod Rolling Processes and Preciseness of Rolled Shapes
Synthesis of Nanocomposite Materials on the Basis of Ultra Disperse Diamonds and Nano-Size Non-Diamond Carbon Structure Oxides and Carbonates of Metals
Strain and Stress Fields in the Lithosphere in Tectonically Active Areas of Central Asia
Explosive Protection when Fighting Terrorism and in other Areas of People Activity Related to Explosives Handling
Detection of explosives by gamma-activation method
Detection of Explosives by Gamma-Activation Method
Metal-Polymer Bearing Composites and Anti-Corrosion Coats on Base of Explosive-Activated Adhesion-Inert Thermoplastics
Near Real-Time Estimation of Seismic Vulnerability of Buildings with Images Application
Application of Microalloying for Increase Strength of Drawable IF-steels for Automobile Industry
Investigations of Mechanisms of Damaging and Microstructure and Properties Evolution of Materials in Conditions of Impact of Extreme Ionizing Radiation Pulse Fluxes for the Purpose of Radiation-Thermal Resistance Increase
Cleanup of High Level Waste Tanks. Technology Development
Development and Study of Properties of Enhanced Density Composite Materials for Construction Activities at Nuclear Power Facilities
Large Impacts on the Early Earth: Computer and Laboratory Modeling of Physical Processes
Experimental Testing of Radiation Mechanism of Chiral Biosphere Dissymmetry Origin
Fundamental Studies of Radiation-Induced Processes for Production of Radiation Resistant Structural Materials for Fission and Fusion Reactors and Future Advanced Technologies
Retrospective Evaluation of Radioactive Discharges into the Techa River on the Basis of Radioecological Monitoring and Dosimetric Modeling Data
Development of the Technological Basis for Serial Production of CCDTL Structures in the Energy Range of 40-100 MeV for the SPL Project. Feasibility Study of Effective Application of Normal Conducting CCL Structures in the Energy Range of 100-180 MeV
Research and Development of Photoelectrochemical Light Energy Converters Based on Organic Semiconductors Using the Principles of Photobionics
Development of an Automated System for Measuring Concentrations of Heavy Metals in Processing Solutions and Industrial Waste Water at Electroplating Facilities
Environmentally Friendly Small Capacity Power Plants Based on Fuel Cells for Stationary Application
Development of Concept and Methodology for Assessing Risk of Nuclear Weapon Proliferation through Civilian Nuclear Power Systems
Improving Methods of Radioactive Waste Storage with Advanced Fire-Safety Neutron-Capture Materials on the Basis of Light Elements
New Methods of Utilization of Polyethileneterephthalate Waste Unfit for Self-Decomposition
Thermodynamic Stable Metal Compositions for Improvement of an Operational Safety of Constructional Materials under Conditions of Multifactor Loadings of an Aggressive Environment
Working out of the Technology and Design Documentation for a Container Plant for Providing Drinking Water According to the Demands of World Health Organization, Experimental Work and Preparing for the Serial Production
Extreme Processes Near Neutron Stars and Black Holes
Neutron-Diffraction Study of Micro- and Macrostresses in Structural Ageing Alloys for Nuclear Power Engineering after Thermal and Radiation Exposure and Predicting Resistance to Radiation-Induced Swelling
Neutron-Diffraction Study of Micro- and Macrostresses in Structural Ageing Alloys for Nuclear Power Engineering after Thermal and Radiation Exposure and Predicting Resistance to Radiation-Induced Swelling
Development and Investigation of the Single-Point System of Short and Medium Radius of Action for Lightning Location in the Range of Super-Long Waves
Development of Fibre-Optic Dosimeters for Civil Nuclear Industry, Environmental Monitoring, and Medicine
Application of Ionizing-Radiation Sources to Increase Agricultural-Crop Capacity and Adaptivity
Enhanced-Safety Remotely Controlled Blasting System for Metal Structure Cutting
Development and Efficiency Analysis of Blast Techniques of the Seismic Traces Calibration for CTBT
Development of Novel Approaches in X-Ray Optics and X-Ray Methods to Study Matter
Computer-Aided Design of Farnesylproteintransferase Inhibitors, Synthesis and In-vitro Estimation of Their Anti-cancer Action
Investigations on Possibilities of Using of Luminescent Methods to Identify Explosives
Development of the Tool for Urological Surgery
Complex Analysis of Radiation, Technogenic and Social Risks Structure for Population of Areas of Nuclear Industry Influence
Methods of Improving Alumina Ceramics Strength
Optimization of Complex Application of Medicines and Perfluorocarbon Blood Substitutes based on Studying of their Interactions with Transport Serum Protein
Investigation on Pre-Explosive Phenomena in Energetic Materials at Real-time (0.1 ns ÷ 0.1 ms)
The Computational and Experimental Investigations of Problems of Excess Plutonium Safe Storage
#3499Local Forest Fires
Developing a New Method Intended to Fight Local Forest Fires. Simulation, Laboratory, and Full-Scale Experiments
Atomic Database SPECTR-W3 for Plasma Spectroscopy and Other Applications
Miniaturized Biocompatible Antenna for Implantable Telemetry Devices
Development of Tomographical Methods for a Research of an Electrical Activity of a Cordial Muscle
Charged Particles Acceleration by Shock Waves in Space Plasma
Measurement of gamma-multiplicity at nuclear fission of californium–252, uranium–235 and plutonium–239
Theoretical and Numerical Study of Intense Femtosecond Laser Pulses Interaction with Nanostructures, Simple Quantum Systems and Plasmas
Modernization of a Treatment Planning System for Proton Therapy (Development of Monte Carlo Codes, Databases, Treatment Planning System Verification, Verification of Complicated Treatment Plans)
Development and Introduction of Early Diagnostics and Prevention of Cardiovascular Diseases Programs into Atomic Industry Enterprises
Research and Development of Advanced Magnetotherapy Methods for Treatment of Central Nervous System Disorders and Oncological Pathologies
Medical Facility for Neutron Capture Therapy Based on Compact Tandem Accelerator
A System Approach to the Analysis of Irradiated Nuclear Fuel Intermediate Storage
Electrical Explosion of Microwires in Vacuum. Experiments and Simulations
Monitoring, Mathematic Migration Modeling, Development of Methodology of Hydro-Litho-Sphere Pollution Sources Isolation Concerning Heavy Metals and Rehabilitation of Hydro-Litho-Sphere Around Ore Processing Combine of Kara-Baltinsk
Development of High Power Solid State Neutron Production Targets for SPIRAL-II (GANIL, France) and SPES (LNL-INFN, Italy) Facilities.
Tests of Divertor Plate Mock-Ups under Energetic High-Temperature Plasma Stream
Examination of Functional Capabilities of Electronic Seals at the RFNC VNIITF, Enterprises of the Ural Region, and NNC of the Republic of Kazakhstan
Experimental Study on Critical Issues of Nuclear Energy Systems Employing Liquid Salt Fluorides
Development of Object Revealing Technology in Covering Environments Using Magnetic Field Measurements
Physical and Chemical Evolution of Nonideal Plasma of the Sun Inferred from Modern Helioseismic Data
Energy Gain Optimization in the Fast Ignition Concept at the Impact Initiation of a Fusion Reaction
Radiometer to Control Microconcentrations of Alpha-Emitting Isotopes in Aqueus Media
Development, Manufacture and Experimental Investigation of a Unique Pilot CCDTL Accelerating Section in the Energy Range of 50-100 MeV for the New Accelerator Linac4
Modeling of Primary Stages of Photosynthesis on the Basis of Nano-Sized Supramolecular Systems
Development of Ultrasonic Equipment and Typical Complex Technology for Deep Purification of Acid Mine Waters (AMW) in the Regions of Extraction and Reprocessing of Mineral Resources (Using Urals as Example)
Development of Gamma and Geomagnetic Measurement Emulators for Training
Multicomponent Synergetic Shells of Refractory Interstitial Phases with Substructural Metal Sublayer for Double Protection and Safety Enhancement of Industrial Materials Application under Ionizing Radiation Effect
Generation of Novel Nanostructured Materials Based on Al and Fe Nanopowders and Study of their Properties
Study into Current-Voltage Characteristics and Dielectric Strength of the Vacuum Gap for a Combination of a Vacuum Interrupter and a Plasma Opening Switch
Low Frequency Electromagnetic Waves in Anisotropic High Pressure Space and Astrophysical Plasmas
Development of a Physical-Mathematical Model of Radioactive Isotopes Migration with Groundwater from Republic of Kazakhstan’ Uranium Enterprises Using Stepnogorsk Mining and Dressing Enterprise (SMDE) as an Example
Appraisal of Eco-Condition of Lithosphere’s Upper Hydrodynamic Zone of Guarded Eco-Resort Region of Caucasian Mineral Waters around Radioactive Dumping of Mining Object in Lermontov Town
#A-1503Direct-heating Skull Furnace
Development of a Mathematical Model of a Direct-heating Skull Furnace for High-melting Glass Production
Creation of Cryogenics Helium Complex on Pulse Nuclear Reactors of RFNC-RSRITP of Snezhinsk for Radiation Physics of Solids.
Development of Recommendation to Perform Danger and Risk Analysis for Declaration of Industry Object Safety of State Holding Company "Ulba"
Development of Technical Proposal and Manufacturing of Mobile Ecology Laboratory. "Serebryanka" Project.
Development of Structural Materials Testing Complex Located at the Former Semipalatinsk Test-Site. Project SMTC-STS.
#K-127.2Mobile Holographic Complex
Development of Mobile Holographic Complex for Non-Destructive Testing and Technical Diagnostics of Machines and Constructions under Laboratory and Natural Conditions
Development of Digital Holographic Complex for Contactless Measurements of Transient Dynamic Deformations in Materials and Constructions
Estimation of Radiological Safety on Sites of Series of Technological Peaceful Nuclear Explosions in Kazakhstan
#KR-072Tail Storages Study
Development of Scientific Bases and Complex Studying of Radioactive and Other Hazards of Tail Storages of the Northern Kyrgyzstan Accumulating Radioisotopes and Accompanying Toxic Metals
#KR-1371Greenhouse Gases over Kyrgyzstan
Comprehensive Monitoring Atmospheric Pollution and Greenhouse Gases Influencing Changes of the Ozone Layer and Climate Over Mountain Region of Central Asia (Kyrgyzstan)
Fine Structure of Regular Geomagnetic Variations from Satellite and Ground-Based Data
Velocity Structure and a Media's Elastic Properties in Strong Earthquake Source Zones of Tien-Shan
Total Contents Monitoring on Issyk-Kul Station of Influencing onto the Climate Atmospheric Constituents (Northern Tien Shan, Kyrgyzstan)
Study of Possible Thorium and Other Rare-Earth Waste Transport with Natural Waters (Case Study of Kyrgyz Chemical-Metallurgical Plant)
Development of Automated System for Radon Monitoring and Recommendations for its Usage as an Information Predictor of Earthquakes in the Northern Tien Shan (The Kyrghyz Republic)
A Study of Parameters and Mechanism of Circumpolar Ionospheric Current System Formation
Estimation of Seismic Risk for the Chui Valley of the Kyrghyz Republic
Estimation of Seismic Risk for the Chui Valley of the Kyrgyz Republic
Telecommunications Support of ISTC Projects in Kyrgyz Republic
Development of the Holographic Interferometer with the Expanded Field of Its Application
Lidar Monitoring of Aerosol and Temperature of Central Asia Middle Atmosphere
Study of Natural Processes Taking Place in Issyk-Kul Lake and Issyk-Kul Depression by Means of Isotope Methods
#KR-330.2Climate Fluctuations in Tien Shan
Study of Quaternary Climate Fluctuations in Tien Shan: Glaciation and Level's Fluctuations in Closed Lakes Issyk-Kul and Chatyrcul (Kyrgyzstan)
Studying Water Balance and Hydrodynamics of Lake Issyk-Kul with a Help of Isotope Methods
Prediction of Catastrophic Landslide Phenomena: New Methods and Means
Investigation of Climate Change in the Tien Shan Highland Based on the Study of Quantitative and Qualitative Composition of Glacier Annual Layers
Manas. Development of Systems of Detection and Technologies for Radiation Monitoring of Conserved Uranium Pits and Territories of Issyk-Kul Region of Kyrgyzstan
Study of the main ecological indicators of the territories adjacent to the uranium production in conditions of its partial conversion
Monitoring Variability of Pollution and Climate Forming Gas Species in the Atmosphere over Northern Tien-Shan, Kyrgyzstan